.

Two-speed (33 & 45 rpm) manual turntable. Features synchronous motor, belt drive, 4-lb platter, removable cartridge shell. Comes complete with tonearm, base, and dust cover.
...................$109.95

Same except for 110-220, 50-60 Hz operation
.....................$116.95

Same as AR-XA but with Shure M91ED cartridge premounted
......$164.90

Two-speed (33 & 45 rpm) manual turntable. Features synchronous motor, belt drive, 4-lb platter, viscous-damped cueing, and removable cartridge shell. Comes complete with base, dust cover, and tonearm.
................................ $119.95

Same as AR-XB but with Shure M91ED premounted
..............$174.90

Two-speed (33 & 45 rpm) fully automatic single-record unit. Has single operating switch; facility for manual operation. Constant-voltage asynchronous motor; built-in self adjusting anti-skating. Rumble 60 dB (DIN B); wow & flutter ±0.15% peak value (DIN); fine-speed adj. 6%. Adjustable counterweight on tonearm; adjustable stylus pressure 0 to 3.5 g. Comes with SP 12A elliptical, naked-diamond stylus. Low-profile, functional design. Hinged dust cover which can be removed if desired. Will play all size records with dust cover closed
........ $265.00

Record-changing turntable with belt drive; features 24-pole, low-speed (300 rpm) synchronous motor; fundamental vibration frequency 5 Hz. Has solid-state electronic frequency generator module to adjust speed; adjustable for ±3% pitch variation. Features the "Programmer" by which a single record can be repeated up to six times before the machine turns off; also used for automatic play of up to six different records; cycling information is set by user on the control panel. All automatic functions activated by single cycle button requiring only 90 gr of perpendicular force and 0.0625" of travel to operate. Anti-skating and stylus pressure functions handled by tandem controls operating along a single scale. Knob control for cueing rate adjustment (continuously varied between 1 and 3 sec); plug-in male/female pin connectors for attaching cartridge head to tonearm; gimbaled tonearm with needle bearings; 15° tracking adjustment for stack of records, 12" cast single-piece platter, die-case isolated tonearm counterweight
..........................$199.95

Same except without electronic speed control and variable pitch feature
... $149.50
Solid oiled-walnut base, matte black molded base, and hinged dust cover available extra.

Two-speed (33 & 45 rpm) unit for 7", 10" & 12" records; features variable pitch control & strobe disc; synchronous motor; die-cast platter; viscous damped cue & pause control; dual-range anti-skate control and slide-in cartridge head; comes with ADC K5E elliptical magnetic cartridge, walnut base, and dust cover
................................. $148.80

Similar to 2620W except has front operation controls, pilot light, stylus wear indicator, accessory tray, wood grained base & hinged dust cover
.......................$147.80

Three-speed version of Model 2620W; has lighter platter; does not include variable pitch control & strobe disc; comes with ADC K7E elliptical magnetic cartridge, walnut base, and dust cover
...........................$118.80

Same as 2520W except with accessory tray, walnut-grained plastic base and hinged dust cover
.......................$110.80

Has 4-pole induction motor; anti-skate, cue & pause controls; accessory panel; comes with ADC K8E elliptical magnetic cartridge
................................. $98.80

Similar to 2310X except front operation
controls & pilot light included
.......$125.80

Similar to 2310X except economy design with full-size platter, anti-skate, cue & pause controls; comes with Shure M-81SC magnetic cartridge, base & dust cover
............... $81.80

Two-speed (33 & 45 rpm) manual/changer combination; Quad-Ready; features anti-skating control; synchronous motor; direct-drive; record repeat, cueing & pitch controls; stylus wear indicator; accessory tray; stylus pressure adjustable from 0 to 4 g; 7 1/4 lb platter; removable cartridge shell; comes with walnut base, dust cover, and Shure M-91ED magnetic cartridge
................................ $294.80

Similar to 810QX except has lighter platter and different tonearm gimbal; comes with Shure M-91E magnetic cartridge
................................ $249.80

Integrated turntable with SAU2 arm and pickup assembly. Has push-button speed control; hydraulic lift and lowering of tonearm; anti-vibration springs; lightweight cartridge shell with self-cleaning contacts. Two-speed (33 & 45 rpm); 60-Hz synchronous constant speed 450 rpm; belt drive. Rumble -50 dB (RIAA); hum -80 dB; wow & flutter 0.1%. Has 10VV aluminum platter. 133/4"x 15V2"x4V2" H (including dust cover). Comes with arm, base, dust cover
but without cartridge ............. $139.95
Tonearm with head shell ...... $50.45
Head shell for SAU2 tonearm......$6.50

.

.

Additional features include: mode selector which lowers tonearm base to parallel tonearm to record for correct vertical stylus tracking in single-play mode, raises tonearm base to parallel tonearm to center of stack in multiple-play mode. Tonearm suspension centers tonearm within four-point gyroscopic gimbal. Tonearm tracks down to 1/4 gram. Damped counterbalance. Tracking pressure dial calibrated in tenths of a gram. Synchronous/continuous-pole motor. Built-in illuminated strobe with adjustable viewing angle. 12", 7-pound platter. Cue control system with silicone damping in both directions. Four-point-damped spring suspension. 14 3/4" x 12" plus 1" at rear and right for tonearm overhang. 5" above, 3" clearance below mounting board
..................$259.95
DUAL - DCB-6. Danish-style combination base and dust
cover............................$44.95
DUAL - DC-9X. Deluxe dust cover with lift-open front
................................. $39.95
DUAL - WB-19. Oiled walnut base........... $14.95
DUAL - DC-9. Smoke-tinted dust cover ...... $14.95

Additional features include: tracking as low as 3/4 g. 4-lb one-piece die-cast platter. Rotating single-play spindle
..............$159.95

Additional features include: four-point gyroscopic gimbal tonearm suspension. Tracking angle selector for single- and multiple-play. Tracking down to 1/2 gram. Damped counterbalance with coarse and fine adjustments. Synchronous/hi-torque motor, 4-lb one-piece die-cast platter; illuminated strobe
.................................$189.95

Additional features include-, tracking as low as 1 gram. 3 3/4-lb platter. 12 4/5" x 10 3/4" x 5" above and 2 3/4" below mounting board
......$129.95

DCB-5. Danish-style combination base and dust cover
............................$44.95
MB-10. Molded base................$9.95
WB-12. Oiled walnut base...........$14.95
DC-4. Smoke tinted dust cover....... $12.95

All-electronic direct-drive brushless d.c. motor with regulated power supply. An exclusive overlapping coil design provides gapless rotating magnetic field. Two Hall-effect generators for electronic self-regulating speed monitoring. Motor rotates at actual record speed: 33 1/3 or 45 rpm; top of shaft functions as record spindle. Separate 8% pitch-control for each speed. Illuminated strobe with adjustable viewing angle. 12" one-piece dynamically balanced die-cast platter; combined rotating weight (platter plus rotor) 9.7 lbs. Gimbal-mounted 83/4" tonearm. Two anti-resonance filters integral with counterbalance, tuned to tonearm/cartridge system and chassis. Stylus pressure 0 - 3.0g, calibrated in 10ths of a gram. Anti-skating. Cueing system damped in both directions. Rumble: -70 dB. Wow & flutter: 0.03%. 16.5" x 14.4" x 5.8". With base and dust cover .................................$400.00

8-pole synchronous motor; belt drive; fully automatic and manual start/stop; single-play/ continuous-repeat switch. 6% pitch control each speed (33 & 45). 12" dynamically balanced platter; cueing system damped in both directions; anti-skating system calibrated for conical, elliptical, and CD-4 styli. 16.5" x 14.4"
x 5.8". With base and tilt-hold dust cover
.................................$270.00

Three speeds (33, 45, & 78 rpm); rumble -40dB (NAB); wow 0.06%; flutter 0.02%. Stylus force adjustable 0 to 6 1/2 g ±0.1g. Mounting clearance 5 1/2" above board, 2" below. Has hysteresis motor and anti-skating device, cueing lever, and built-in lighted stroboscope. 14 1/8" W x 12 1/8" D. Without base or cartridge
................................$225.00

Features 4-pole synchronous motor, cueing lever, and anti-skating device. Four speeds (16, 33, 45 & 78 rpm). Will handle 7", 10" & 12" records. Rumble -38 dB (NAB); wow 0.07%; flutter 0.03%. Stylus force calibration 0 to 6 1/2 g ±0.1g. Space required above mounting board 5 5/8", below 2 5/8". Less base & cartridge
................................$119.95

Features 4-pole induction motor. Operates at 78, 45, and 33 rpm. Will handle 7", 10", or 12" records. Rumble 44 dB (NAB); wow 0.06%; flutter 0.02%. Tracking error less than 0.4 degree per inch. Stylus force adjustment calibrated 0-6 1/2 g (accurate to within 0.g). Speed adjustable over a 6% range for semitone of pitch adjustment. 12" die-cast platter; dynamically balanced tonearm. 14" W x 12" D x 5" above motorboard, 2" below
............$189.50

Three-speed (33, 45 & 78 rpm) manual/changer combination. Features variable speed control, hysteresis motor, anti-skating device, cueing control, tracking angle adjustment, and adjustable stylus pressure from 0 to 6V2 g. Wow 0.05%; -42 dB rumble. Has removable cartridge shell, overhang adjustment, and an
elapsed time indicator. 9 1/2" H x 14 1/2" W x 12 7/8" D
.........................$265.00
Wood vinyl-covered base............ $11.00

Features 4-pole asynchronous motor; three-speed (33, 45 & 78 rpm) operation; automatic programming of tonearm for 12" records at 33, 7" records at 45; push-button start and stop; variable pitch control (up to 5% range); built-in strobe speed indicator; calibrated anti-skate for elliptical and conical styli; viscous-damped up and down cueing in all modes; low-mass arm and head assembly; tracking as low as 1 gr; heavy pressure-formed platter.
Less base and cartridge.........................$129.95

Two-speed (33, 45 rpm) manual turntable. Has anti-skating device, hysteresis synchronous motor, belt drive, cueing control, and removable cartridge shell. Wow & flutter 0.01%; stylus pressure adjustable from 0 to 4 g; rumble -90 dB. Has built-in 45-rpm spindle, 12" platter. 16" W x 13 1/2" D x 3" above mtg. board,: 3 1/2" below. Comes with 4000D/III low-tracking cartridge, base, and Plexiglas cover
.....$399.95

.

Features an articulated tonearm with zero tracking error; magnetic anti-skating control; 15 degree vertical tracking adjustment; built-in record counter (stylus timer); viscous damped tonearm cueing in both directions. Has Synchro-Lab (combination induction and synchronous) motor with variable speed control and illuminated stroboscope. Two speeds (33 & 45 rpm)
.................. $209.95

Essentially same as Zero 100C, lacking a few refinements. Has same zero-tracking error tonearm with 15 degree vertical tracking adjustment and viscous damped cueing control. Also two-point support for stack of records. Sliding weight stylus-force and anti-skating adjustments. Synchro-Lab motor. Three separate control tabs
......................$169.95

Identical to Zero 92 except for tonearm. Has low-mass aluminum tonearm; interchangeable spindles; cartridge overhang adjustment; two-point record support; damped cueing
.................................$119.95

Features same record-support platform system as the more expensive models. Has low-mass extruded aluminum tonearm with adjustable counterweight for zero balance (before setting stylus force with calibrated gauge). Synchro-Lab motor; damped cue control; three speeds (33, 45 & 78 rpm)
............$89.95

Consists of Model 70 with factory installed Shure M93E elliptical cartridge and BW10 wooden base
....................$109.95

Similar to Model 70 except for heavy-duty, 4-pole induction surge motor and fixed counterweight in tonearm
..................$69.95

Four-pole induction motor; overhead stabilizer arm for record stack; tubular aluminum tonearm; damped cue control; plays 33, 45 & 78 rpm
..............................$49.95

Same as 40B but comes with factory installed magnetic cartridge and BW10 wood base
...................$69.95

Same as 42M except 2-pole induction motor and Tetrad ceramic cartridge
..........................$59.95

Features an articulated tonearm with zero tracking error; magnetic anti-skating control; built-in record counter; viscous damped cueing; Synchro-Lab motor; belt driven 4-lb dynamically balanced zinc alloy platter. Includes teak wood base and hinged dust cover
.................................$209.95

Same as Zero 100SB except has non-articulated low-mass aluminum tonearm with sliding weight anti-skate control
.....$169.95

Three-speed (33, 45 & 78 rpm) changer with turntable mechanism suspended under single-piece deck; 11" platter; will handle 7", 10", and 12" records; cueing control; integrated lever function control for on/off/reject and speed; ceramic cartridge with diamond stylus; tubular tonearm with adjustable counterweight. Wood cabinet with tinted dust cover. 16" W x 8" H x 14" D
............................$74.95

Similar to CA960 but with shock-mounted turntable; 9" platter; new-design tonearm. 16" W x 7" H x 14" D
........$44.95

.

Heavy-duty 4-pole motor; 11" turntable platter with protective mat; bi-directional viscous-damped cue and pause control; adjustable anti-skate control calibrated for conical and elliptical styli; calibrated stylus-pressure control; interchangeable automatic and manual spindles; ball-race pivoted tonearm,- automatic tonearm locking rest; record stabilizer arm with finger-lift; comes with audio cables and Shure M75E magnetic cartridge
................$112.80

Same except without dust cover, base, or cartridge
........................$59.95

High-torque induction motor; 11" turntable with cushioned mat; bi-directional viscous damped cue and pause control; built-in anti-skate; ball-race pivoted tonearm; swing-away control arm; cue and pause control; interchangeable manual and automatic play spindles; automatic locking tonearm rest; comes with audio cables and Shure M75E magnetic cartridge
..........................$84.50

Features 11" turntable platter with cushioned protective mat; bi-directional viscous-damped cue and pause control; ceramic cartridge/ diamond stylus; adjustable anti-skate control; stylus pressure control with indicator; automatic locking tonearm rest; interchangeable manual and automatic play spindles; 45 rpm adapter spindle
........................$64.95

Automatic locking tonearm rest; cue and pause control; interchangeable manual and automatic play spindles; 45 rpm adapter; ceramic cartridge/diamond stylus
...............$54.95

Same except without dust cover, base, or cartridge
........................$34.95

Features underslung gimbal tonearm with adjustable counterbalance; heavy-duty 4-pole a.c. synchronous motor; 11" turntable platter with protective mat; low-mass plug-in head shell; bi-directional viscous-damped cue and pause control; anti-skate control calibrated for conical and elliptical styli; interchangeable automatic umbrella and manual spindles; pure gravity stylus-pressure adjustment; automatic tonearm locking rest; three modes of operation depending on spindle application
.................. $159.95

Direct-drive d.c. motor; adjustable speed control with neon strobe; 12" die-cast aluminum turntable; two speed (33 & 45 rpm); wow & flutter 0.05% W rms; S/N 60 dB; effective arm length 95/8"; features balanced S-shaped tonearm; calibrated stylus pressure adjust; adjustable anti-skating; resonance-free beechwood base & dust cover; 4-channel adaptable. 7V2" H x 19V/ W x 16V/ D
..........$349.95

Four-pole synchronous motor; belt-drive system; features viscous damped cueing; anti-skating adjust; push-button speed selection (33 & 45 rpm); auto lift at end of record; S-shaped tubular tonearm; plug-in head.
.................$129.95

Direct-drive automatic turntable powered by an 8-pole brushless 24-slot d.c. motor coupled to the center of the turntable; wow & flutter 0.05%; S/N 58 dB; two speeds (33 & 45); elliptical cross-section, statically balanced tubular tonearm with cartridge shell adjustable for precise stylus-to-record contact angle; direct-reading stylus balance gauge adjusts stylus pressure from 0 to 4 gr in 0.25 gr increments; automatic indexing of 7", 10" and 12" records, repeat play, automatic arm return, and power shut-off; muting delay circuit; pause lever for accurate cueing; manual operation provided. Has anti-skating adjustment; stylus lamp gauge; stroboscope speed adjustment; 12" solid die-cast aluminum alloy turntable. Cabinet of non-resonant low-expansion ABS resin; acrylic dust cover with free-stop hinges.
................$229.95

Dual synchronous motors for separate belt drive of turntable and tonearm for low wow & flutter and improved S/N; 12" solid diecast aluminum alloy turntable; two speeds (33 & 45); wow & flutter 0.08% W rms; S/N 48 dB; elliptical cross-section, statically balanced tubular tonearm; fully adjustable cartridge shell; direct-reading stylus balance gauge; automatic indexing of 7", 10 and 12" records; calibrated anti-skating adjustment; stylus lamp gauge. Same cabinetry as KP-5022
..............$199.95

Two-speed (33 & 45 rpm) manual turntable; will handle 7", 10" & 12" discs; rumble -58 dB (CBS-RRLL); wow & flutter 0.1% (DIN); 24-pole synchronous motor; motor drift ±0.5% (DIN); adjustable tracking force 0.5-4.0 g; aluminum alloy, 12" dynamically weighted and balanced platter; viscous-damped cueing; low-deflection equilibrium field suspension; plug-in shell capability for all standard cartridges; adapter for 45> rpm records; 9" tonearm; tracking error ±0.7 degree; 5/i6 aluminum alloy tube; automatic operational capability lifts tonearm off record and unit shuts off. Walnut veneer base and hinged dust cover
..................$149.95

Four-speed (16, 33, 45 & 78 rpm) design with continuously variable speed from 30 to 86 rpm. Will handle 7", 10", or 12" records. Rumble (NAB) -40 dB; wow & flutter 0.06%. Features electronic shut-off and arm lift; balanced tonearm; automatic viscous-damped cueing; anti-skating; low-mass cartridge head; high-mass base suspension system. Tonearm 8"; turntable diameter ll 3/4". Motor is 4-pole constant-velocity type with conical shaft
......$179.50

Two speed (33 & 45 rpm) design with ±3% speed adjustment. Wow & flutter ±0.08% weighted; rumble -63 dB weighted. Has 16-pole synchronous motor with belt drive. Stylus force adjustment 0-5 g. 12V2" platter. Has built-in illuminated stroboscope, anti-skating device, four viscous-damped suspension spring, automatic shut-off, and automatic arm lift
..................$249.50

Four-speed (16, 33, 45, 78 rpm) design with capability for continuous selection of any speed from 30 to 86 rpm. Has automatic viscous damped cueing lever. Wow & flutter 0.12%; rumble-37 dB. 11.8" platter. Anti-skating device.
......... $89.50

Four-speed (16, 33, 45, 78 rpm) design with capability for continuous selection of any speed from 30 to 86 rpm. Features low-mass cartridge head, anti-skating device, automatic viscous-damped cueing lever. 12", 8.8 lb. platter. Wow & flutter 0.06%; rumble -38 dB. 17 1/2" W x 13 7/8" x 6 1/8". With walnut base and hinged dust cover
...........................$149.50

Three-speed (33, 45 & 78 rpm); 4-pole synchronous motor; viscous-damped cue control; counterbalanced tonearm; anti-skate adjustment; rotating spindle for single-play operation; plays six records automatically; muting switch; automatic shut-off; tonearm safety lock; lock-down slide latches; tracking force 3/4-5 g; wow (DIN peak, weighted) 0.15%; rumble (weighted) -55 dB; 11" die-cast non-ferrous platter; Shure M-75 cartridge. Comes with base and dust cover
.....$149.95

.

One piece tonearm tracks as low as 1/2g; 3-position anti-skating; laminated 10 5/8", 3-lb platter
..........................$109.95

One piece counterbalanced tonearm tracks as low as 1g; anti-skating separately calibrated for conical, elliptical, and CD-4 styli; die-cast 10" dynamically balanced 4.4-lb platter
................................ $149.95

Tonearm tracks as low as 0.5 g; tracking force calibrated from 0-3 g; anti-skating separately calibrated for conical, elliptical, and CD-4 styli; vertical tracking-angle adjustment; heavy-duty induction/synchronous motor
.......$169.95

Double-ring gimbal-mounted tubular tonearm tracks as low as 0.5 g; anti-skating; vertical tracking angle adjustment for single and multiple play; fail-safe feature prevents tonearm from descending to platter when no record is on it; automatic record-size scanner; heavy-duty induction/synchronous motor; die-cast 105/s" dynamically balanced 4.4-lb platter
................. $199.95

Servo-controlled, 2-speed (33 & 45 rpm) belt-driven design for single play, complete with tonearm, hinged but removable dust cover, slide-out cartridge plate, and stroboscope ring. Features anti-skating device, hydraulically damped cueing control. Has two independent potentiometers for speed calibration (±3%). Drift 0.2%; wow & flutter 0.1%; rumble -40 dB NAB weighted. Stylus force range 0.5-4 g. Arm resonance 7 Hz. 11 1/2" platter. 110 to 240 V, 50/60 Hz operation.
.................. $164.50

Two-speed (33 & 45 rpm) fully automated, electronically controlled turntable; three motors (turntable drive, pickup arm movement, cueing); separate fine-speed adjustment ±3%; wow & fllutter 0.08%; rumble -43dB (DIN A); stylus force 0.75-3g adjustable; anti-skating force adjustable for spherical & elliptical styli; turntable drive 9V d.c. motor with 72-pole tacho generator; pickup arm lift touch-controlled, viscosity damped pickup arm lift; optional manual operation; photoelectric end-of-record switch-off system.
.........................$349.50

Two-speed (33 & 45 rpm) belt-driven, 4-pole synchronous motor; wow & flutter 0.1% W rms; S/N 47 dB; 12" aluminum alloy die-cast platter; static-balance S-shaped pipe arm; stylus pressure 4g to 8.5 g; anti-skating; oil-damped cueing device; stylus pressure direct-readout counterweight; plug-in headshell. 16" W x 6 1/2" H x 13 3/8" D
...................$99.95

Belt-driven with 4-pole synchronous motor. Features 33- &45-rpm operation. Wow & flutter 0.1% (W rms). S/N 47 dB. 12" die-cast platter. Comes with static-balanced S-shaped tonearm, base, and free-stop dust cover. Stylus pressure from 0.75 g. Has anti-skating control, cueing device, direct-reading counterweight, lateral balancer, and stylus position gauge (overhang
indicator)
................................ $119.95

Has brushless d.c. servo-controlled motor; direct-drive system. Operates at 33 & 45 rpm (electronic speed change). Speed change control range within ±2%. Wow & flutter 0.06% (W rms). S/N 55 dB. 12V/ aluminum alloy die-cast platter. static-balanced S-shaped pipe arm with plug-in head shell; W overhang. Has anti-skating control, lateral balancer, stylus pressure direct-readout counterweight. Comes with wooden cabinet and metal base with free-stop dust cover
................................$249.95

Features 33 & 45 rpm operation. Belt-driven with dual motor design (a 4-pole synchronous for rotating platter & a gear motor for all automatic operations). Provides automatic repeat & tonearm return. Complete with oil-damped cueing and anti-skating devices. Comes with base & dust cover. Wow & flutter 0.10% (W rms); tracking force 1.5 to 2.1 g. 12" platter
..........$149.95

Two-speed (33 & 45 rpm), two-motor belt-drive system; 4-pole synchronous motor (for platter), gear motor (for automatic functions); wow & flutter 0.1% W rms; S/N 47 dB; 12" aluminum alloy die-cast platter; static-balance S-shaped pipe tonearm; usable cartridge weight 4 to 10 g; anti-skating; oil-damped cueing device; stylus pressure direct-readout counterweight; lateral balancer; plug-in headshell
...........................$169.95

Two-speed (33 & 45 rpm), all-electronic, direct-drive turntable with brushless d.c. servo motor; electronic speed change; speed control range ±2%; wow & flutter 0.05% W rms; S/N 60 dB; 12V/ aluminum alloy die-cast platter; static-balance S-shaped pipe tonearm; usable cartridge weight 4 to 32 g; anti-skating; oil-damped cueing device; stylus pressure direct-readout counterweight; lateral balancer; arm height adjustment; plug-in headshell
.......................$299.95

Two-speed (33, 45 rpm) manual/changer combination with front mounted controls. Has 4-pole motor, anti-skating device, 0 to 6 g stylus-pressure adjustment, and removable cartridge clip (with Shure cartridge). Comes with tonearm and base.
...................... $99.95

Four-speed (16, 33, 45 & 78 rpm) manual/ changer combination. Has cueing control and removable cartridge shell with Shure cartridge. Comes with tonearm and base. 4V/ H x 163// W x 14V/ D
......................$139.95

Three-speed (33, 45 & 78) manual/changer combination. Has anti-skating device, cueing control, and removable cartridge shell with Shure cartridge. Supplied with tonearm and base
............................$198.50

Two-speed (33 & 45 rpm), direct-drive servo-controlled turntable with electronically controlled 20-pole d.c. brushless motor; wow & flutter 0.035%; S/N 60 dB; features electronically controlled speed change/vernier adjustment; built-in Strobo-Lamp for visual speed check; engraved stroboscope platter edge; knife-edge/one-point support S-shaped tonearm; lateral balance adjustment; direct readout arm counterbalance; viscous damping; natural rubber hemispherical insulators; laminated genuine wood cabinet; free-stop removable plastic dust cover
............... $319.95

Two-speed (33 & 45 rpm), belt-drive turntable; 4-pole synchronous outer-rotor motor; wow & flutter 0.06% W rms; S/N 50 dB; S-shaped 81Vi6" tonearm; counterweight with direct stylus pressure scale; 4-contact plug-in head shell; hinged self-retaining dust cover
.............. $199.95

Two speed (33 & 45 rpm) design with 4-pole hysteresis synchronous motor; belt drive; cast aluminum platter; tonearm has adjustments for static balance and tracking force (0.5 to 4 g). "S" bend tonearm. Wow & flutter 0.1%. Can be operated manually or programmed for automatic tonearm return and automatic stop at end of disc. Comes with dust cover. Walnut cabinet.
................. $199.95

Two-speed (33 & 45 rpm) unit with direct-drive a.c. servo-motor. Speed control range ±4%; wow & flutter 0.07% weighted (DIN); (S+N)/N 67dB weighted. Tonearm is 13" static-balanced type; stylus force adjustment 0-3 g; anti-skate adjustment range 0-330 mg; viscous-damped cue control; stylus overhang gauge. Comes with tonearm, wood base, and removable dust cover
....................... $429.50

Two speeds (33 & 45 rpm). Has d.c. servo motor, direct drive, and pitch control. Features built-in illuminated strobe speed indicator; 12" 6-lb platter. Build-up time within Va rotation. Wow & flutter 0.03%; rumble -65 dB. Supplied without tonearm. 4" H x 14" W x 14" D
................... $419.95

Features direct-drive, slow-speed brushless d.c. motor with electronic speed control regulation without belts, idlers, or pulleys. Two speeds (33 &45 rpm). Variable pitch, ±5%, independently adjustable for each speed. Dynamically balanced turntable has 13V2" platter, weighs 4.4 lbs. Wow & flutter 0.03% W rms; rumble -70 dB (DIN B). Build-up time within V2 rotation. Tonearm is static-balanced low-mass tubular with 9V/ pivot-to-stylus distance. Direct-reading tracking force adjustment from 0 to 5 g. Anti-skating control; viscous-damped cueing; universal-type cartridge head shell. Has built-in illuminated speed strobe. Dust cover included
.................................$359.95

Similar to SP-1100A except has 13" diecast aluminum platter weighing 3.86 lbs and a 8n/i6" tonearm. Has hinged, removable plexiglass dust cover
............................$279.95

Automatic set-down, lift-off, arm return, and shut off, using direct-drive servo motor; two speeds (33 & 45 rpm) with 10% range of pitch variation (separately for each); 13" dynamically balanced platter; built-in illuminated strobe speed indicator; "Memo-Repeat" permits repeat play of record up to five times before shut-off or indefinite repeat; gimbal-suspended tonearm (9 1/6" pivot-to-stylus) with low mass, low resonance, four pairs of pivot bearings for rotational sensitivity; anti-skating; hinged detachable dust cover; feedback-cancelling legs; low-capacitance phono cables for CD-4; wow & flutter 0.03% W rms; rumble -70 dB (DIN B)
.................. $299.95

Similar to SL-1100A but manual and without tonearm
..................$299.95

Two-speed (33 & 45 rpm) unit with double synchronous 16-pole motor; will handle 7", 10", 12" records; wow & flutter 0.06%; rumble -43 dB (unweighted), -65 dB (weighted); non-ferrous, anti-magnetic 12" platter; unified suspension system for tonearm mount & platter; anti-skate control; tonearm balance & stylus tracking force adjustable 0.5-3.5 g in 1/2g increments; viscous-damped cueing control; 9" tonearm; arm resonance below 10 Hz. Comes with base, dust cover, plug-in shell for all standard cartridges. 17" W x 12V2" D x 73// with dust cover.
.................................$179.95

Two-speed (33 & 45 rpm) unit with belt-driven 16-pole synchronous motor; 12" non-magnetic platter; rumble -43 dB (unweighted), -65 dB (weighted); wow & flutter 0.06% weighted; unified suspension system for tonearm & drive system; magnetic anti-skating control; cueing control; tonearm 9.06"; stylus overhang 0.55" adjustable. Comes with tonearm, walnut base and dust cover
.................................$215.00

Three-speed (16, 33 & 45 rpm) unit with belt-driven 16-pole synchronous motor; fine-speed adjustment ±2%; illuminated strobe speed control; 12" non-magnetic zinc alloy platter; wow & flutter 0.06% weighted; rumble -45 dB (unweighted), -68 dB (weighted); features magnetic anti-skating control; isolated tonearm & drive system; cueing control. Comes with walnut base and TP-16 9.06" tonearm. 18" x 5" H x 14" W (with 9" tonearm) x 16" (with 12" tonearm)
........................$400.00

Two-speed (33 & 45 rpm) automatic turntable. Has anti-skating device, hysteresis motor, belt drive, and cueing control. Wow & flutter 0.1%; stylus pressure IV2 -2V2 g; -45 dB rumble; 2 lb platter. Comes with tonearm, fixed shell with high-compliance ceramic cartridge, and built-in IC amplifier Supplied with base
................... $199.95

Two-speed (33 & 45 rpm) design with d.c. servo motor, belt drive, automatic stop/rise, and cueing control. Wow & flutter 0.08%; stylus pressure 0-3 g; rumble -55 dB; 2 lb platter. Comes with tonearm, fixed shell with photoelec-tronic cartridge, and FET rumble filter. With base
.........$449.95

Two-speed (33 & 45 rpm) belt-driven design with electret condenser cartridge (Type C-402S). Has S-shaped pipe tonearm with tracking error of ±1.5 degrees. Wow & flutter 0.1% (W rms). Stylus 0.5-mil round diamond. Output 200 mV at 5 cm/sec at 1000 Hz. Compliance 25 x 10~6 cm/dyne (d.c); 8 x 10-6 cm/dyne (100 Hz). Stylus pressure 2.5 ±0.5 g. Response 20-20,000 Hz; (S + N)/IN -50 dB. Features automatic return & cut, cueing control, walnut base, and dust cover
...................... $299.95

Two-speed (33 & 45 rpm) turntable with non-ferrous aluminum disc fitted with five gold-plated non-ferrous platter weights (balanced to within 3 gr.); main bearing ball-ended ground and polished steel spindle running on hardened steel plate; low-speed synchronous recoil start motor; floating motorboard and damped springs for freedom from acoustic feedback; natural-rubber belt drive; universal voltage and frequency operation (by changing voltage selector panel and pulley); speed stability 0.05% at 33 rpm; clear acrylic lid. Comes with Vestigial arm
............................. $290.00

37.5 gr horizontal, 25 gr vertical moving mass; inertia with cartridge 6 gr horizontal, 1 gr vertical; tracking pressure 1/10 gr; system resonance 180 Hz
.........$100.00

Four-speed unit features 10" platter, ceramic cartridge, diamond stylus, removable center spindle, finger lift; will handle 7" & 12" discs automatically; adjustable stylus force; wow 0.6%, flutter 0.3%. Walnut-grained base & tinted dust cover included.
............................$44.95

Deluxe version of 1687 but with 11" platter; cue control; manual size selection
..... $54.95

Dual-synchronous drive motors; 33 rpm; speed accuracy 0.1%; direct rim-drive; rumble -70dB; wow & flutter 0.06%; vertical & lateral damping of tonearm; photocell-activated automatic stop; warning light system to protect record & stylus; S-shaped, static-balance natural wood tonearm, 8V4" pivot-to-stylus; tracking force range 0.5-6 g; universal cartridge mount. Comes with natural wood base and tonearm
......$150.00

Two-speed (33 &45 rpm, electronic switching), direct-drive turntable; brushless 12-pole d.c. servo motor; 12.2" cast turntable with cushioned mat; ±3% speed control (each speed); wow & flutter 0.03% W rms; S/N 60 dB; static balanced S tonearm; 9.5" long; tracking error 1.5 degrees; tracking force 0-3 g; universal plug-in cartridge shell. Walnut cabinet with clear acrylic dust cover.
...........................$500.00

Two-speed (33 & 45 rpm), belt-drive; synchronous outer-rotor motor; automatic pickup and return; wow & flutter 0.08%; S/N 48 dB; 12" aluminum platter; static balanced S tonearm; stylus pressure 0-4 g; universal plug-in cartridge shell. Wood/synthetics cabinet.
..................$220.00